There is a lot of buzz about Citrix VDI-in-a-Box (“ViaB”), and rightly so: it’s a great product, and much simpler to install and easier to scale than a full-blown XenDesktop deployment. You don’t need a SAN, you don’t need special broker servers, you don’t need a separate license server or a SQL Server to hold configuration data. Unfortunately, some of the buzz - particularly some of the cost comparisons you see that show a $3,000 - $4,000 server for 30 or more virtual desktops, is misleading. So let’s talk seriously about the right way to deploy ViaB. For this exercise, I’m going to assume we need 50 virtual desktops. Once we’ve worked through this, you should be able to duplicate the exercise for any number you want.
First of all, I’m going to assume that we are building a system that will support Windows 7 virtual desktops - because I can’t see any valid reason why someone would invest in a virtual desktop infrastructure that couldn’t support Windows 7. There are two important data points that follow from this: (1) We should allow at least 1.5 Gb per virtual PC, and preferably 2 Gb per virtual PC. (2) We should design for an average of about 15 IOPS per Windows 7 virtual PC, because, depending on the user, a Windows 7 desktop will generate 10 - 20 IOPS. Let’s tackle the IOPS issue first.
Thanks to Dan Feller of Citrix, we know how to calculate the “functional IOPS” of a given disk subsystem. Here are the significant factors that go into that formula:
- A desktop Operating System - unlike a server Operating System - has a read/write ratio of roughly 80% writes and 20% reads.
- A 15K SAS drive will support approximately 175 IOPS. The total “raw IOPS” of a disk array built from 15K SAS drives is simply 175 x the number of drives in the array.
- A RAID 10 array, which probably offers the best balance of performance and reliability, has a “write penalty” of 2.
With that in mind, the formula is:
Functional IOPS=((Total Raw IOPS x Write %)/(RAID Penalty)) + (Total Raw IOPS x Read %)
If we put eight 15K SAS drives into a RAID 10 array, the formula becomes:
Raw IOPS = 175 x 8 = 1,400
Functional IOPS = ((1,400x.8)/2)+(1,400x.2) = 560 + 280 = 840
If we are assuming an average of 15 IOPS per Win7 virtual PC, this suggests that the array in question will support roughly 56 virtual PCs. So this array should be able to comfortably support our 50 Win7 virtual PCs, unless all 50 are assigned to power users.
That’s all well and good, but we haven’t talked yet about how much actual storage space this array needs. That depends on the size of our Win7 master image, how many different Win7 master images we’re going to be using, and whether we can use “linked clones” for VDI provisioning, in which case each virtual PC will consume an average of 15% of the size of the master, or whether we’re permanently assigning desktops to users, in which case each virtual PC will consume 100% of the size of the master. For the sake of this exercise, let’s assume we’re using linked clones, and that we have three different master images, each of which is 20 Gb in size. According to the Citrix best practice, we need to reserve 120 Gb for our master images (2 x master image size x number of master images). We then need to reserve 3 Gb per virtual PC (15% of 20 Gb), which totals another 150 Gb. The ViaB virtual appliance will require 70 Gb. We also need room for the hypervisor itself (unless we’re provisioning another set of disks just for that) and for swap file, transient activity, etc., so let’s throw in another 150 Gb. That’s 490 Gb minimum. So we need to use, at a minimum, 146 Gb drives in our array, which would give us 584 Gb in our RAID 10 array.
How about RAM? If we allow 1.5 Gb per Win7 desktop, then 50 virtual desktops will consume 75 Gb. We need at least 1 Gb for the ViaB appliance, at least 1 Gb for the hypervisor, plus some overhead for server operations, so let’s just call it 96 Gb.
We can handle 6 to 10 virtual desktops per CPU core - more if the cores are hyper-threaded - so we’re probably OK with a dual-proc, quad-core server.
Now, I don’t know about you, but if I’m going to put 50 users onto a single server, I’m going to want some redundancy. I will at least want hot-plug redundant power supplies, and hot-plug disk drives. Ideally, I would provision “N+1″ redundancy, i.e., I would have one more server in my ViaB array than I need to support my users. I’m also going to want a remote access card, and probably an uplift on the manufacturer’s Warranty so if it breaks, the manufacturer will come on site and fix it.
By now, you’ve probably figured out that we are not talking about a $4,000 server here. I priced out a Dell R710 - using their public-facing configuration and quoting tool - with the following configuration, and it came out to roughly $11,000:
- Two Intel E5640 quad-core, hyper-threaded processors, 2.66 GHz
- 96 Gb RAM
- Eight 146 Gb, 15K SAS drives
- PERC H700 controller with 512 Mb cache
- Redundant hot-plug power supplies
- iDRAC Enterprise remote access card
- Warranty uplift to 3-year, 24×7, 4-hour response, on-site Warranty
(NOTE: This is a point-in-time price, and hardware prices are subject to change at any time.)
The ViaB licenses themselves will cost you $195 each. Be careful of the comparisons that show the price as $160 each. ViaB is unique among Citrix products in that the base cost of the license does not include the first year of Subscription Advantage - yet the purchase of that first year is required (although you don’t necessarily have to renew it in future years). That adds $35 each to the cost of the licenses.
Finally, If you don’t have Microsoft Software Assurance on your PC desktops - and my experience is that most SMBs do not - you need to factor in the Microsoft Virtual Desktop Access (VDA) license for every user. This license is only available as an annual subscription, and will cost you approximately $100/year.
So, your up-front acquisition cost for the system we’ve been discussing looks like this:
- Dell R710 server - $11,000
- 50 ViaB licenses @ $195 - $9,750
- 50 Microsoft VDA licenses @ $100 - $5,000
Total aquisition cost: $25,750, or $515/user. Not bad.
But wait - if we’re going to compare this to the cost of buying new PC, shouldn’t we look at the cost of ViaB over the same period of time that we would expect that new PC to last? If we assume, like many companies do, that a PC has a useful life of about 3 years, then we should actually factor in another two years of VDA licenses, and two years of Subscription Advantage renewal for the ViaB licenses. That pushes the 3-year cost of the ViaB licenses to $13,250, and the cost of the VDA licenses to $15,000. So the total 3-year cost of our solution is $39,250, or $785/user.
If you want N+1 redundancy, you’re going to need to buy a second server. That would push the cost to $50,250, or $1,005/user.
What conclusions can we draw from all this? Well, first, that VDI-in-a-Box is not going to be significantly less expensive than buying new PCs, if you actually do it right. However, it is competitive with the price of new PCs, which is worth noting. As long as the price is comparable, which it is, we can then start talking about the business advantages of VDI, such as being able to remotely access your virtual desktop from anywhere, with just about any device, including iPad and Android tablets, and about the ongoing management advantages of having a single point of control over multiple desktops.
Also, as you scale up the environment, the incremental cost of that extra server that’s required for N+1 redundancy gets spread over more and more users, and becomes less significant. For example, if we’re building an infrastructure that will support 150 virtual desktops, we would need four servers. Total 3-year cost: $128,750, or $858.33/user for a robust, highly redundant virtual desktop infrastructure. In my opinion, that’s a pretty compelling price point, and you won’t be able to hit that price point with a 150-user XenDesktop deployment, because of the other server and storage infrastructure components that you need to build a complete solution. On the other hand, XenDesktop does include more functionality, like the rights to use XenApp for virtual application delivery, ability to stream a desktop OS to a blade PC or a desktop PC, rights to use XenClient for client-side virtualization, etc.
But if all you want is a VDI solution, ViaB is, in my opinion, the obvious choice. It’s clear that Citrix wants to position VDI-in-a-Box as the preferred VDI solution for SMBs, meaning anyone with 250 or fewer users…and there’s no reason why ViaB can’t scale much larger than that.
For more information on ViaB, check out this video from Citrix TV, then head on over to the Citrix TV site to view the entire ViaB series…
**** EDIT April 12, 2012 ****
You may already be aware of this, but Dell has announced a ViaB appliance that comes pre-configured, with both XenServer and the ViaB virtual appliance already installed. Oddly enough, even though Moose Logic is a Dell partner, I couldn’t get Dell to tell me what one would cost. Their answer was that I should call back when I had a specific customer need, and they would work up a specific configuration and quote it. I considered calling back with a fictitious customer requirement, but decided that I didn’t want to know badly enough to play that game.
They did, however, tell me what the basic server configuration was - and it was very close to the configuration I’ve outlined above: two X5675 processors, 96 Gb of RAM, eight 146 Gb drives in a RAID 10 array, Perc H700 array controller (don’t know how much cache, though), and iDRAC Enterprise remote access card. I do not know whether it has redundant power supplies (although I would certainly hope so), nor exactly what Warranty is included…perhaps that option is left up to the customer.
That gave me at least enough information to run a sanity check on the configuration. The array would provide 960 functional IOPS, which should be adequate for an 80 user system - which is how the appliance is advertised - depending, of course, on the percentage of power users. Also, the array should provide enough storage to handle the needs of most SMBs, unless they have an unusually large number of images to maintain.
One of my Citrix contacts recently told me that the Dell appliance was priced at $440/desktop for an 80 concurrent user configuration, which is very much in line with the cost per user in the post above, considering that $100 of my $515/user number was for the first year of Microsoft VDA licenses, which, to my knowledge, are not included with the Dell appliance.